Every wheel we sell is a genuine Pro Wheel, built by Pro Wheels in the USA and sold by Wheel Whisperer as an authorized Pro Wheel dealer. Your wheels are covered by Pro Wheels' own manufacturer warranty. Here is a plain-English summary. The full terms are on the Pro Wheels warranty page, and those terms are what apply.
What's covered
Both warranties apply under normal and reasonable use, to the original purchaser only.
- Structural warranty, for as long as you own the wheels: covers structural defects in material with no time limit while you, the original purchaser, own the wheels. It does not transfer if the wheels are sold.
- One-year workmanship and materials warranty: covers defects in workmanship or materials for one year from the date of purchase.
- Accessories: defective accessories are repaired or replaced while the wheel is under warranty.
Pro Wheels decides whether a covered wheel is repaired or replaced. Removal, installation, transportation costs and loss of use are not covered.
What's not covered
- Abuse, misuse, neglect, accidents, racing, off-road use or road hazard impacts
- Wheels that have been altered, repaired or modified, or used with spacers or adapters
- Incorrect tire sizes or excessive vehicle loads
- Damage from improper or careless tire mounting
- Finish damage or corrosion from chemicals, caustic cleaners, climate or lack of maintenance
- Cosmetic blemishes on wheels that have been mounted, and blemishes on the back side of the wheel
- Shipping damage (see below)
Before you mount tires
Following Pro Wheels' installation instructions protects your wheels and your warranty. Show these to your installer:
- Trial fit every wheel first, before tires go on. Check the bolt pattern and brake caliper clearance. The wheel should sit flat against the hub on its own. Never pull it into place with the lug nuts.
- No spacers or adapters. They void the warranty.
- Use Pro Wheels approved lug nuts, and make sure studs aren't too long for closed-end lug nuts.
- Seat the tire bead at no more than 40 psi in California (60 psi elsewhere). If it won't seat, check for an obstruction or a tire and wheel mismatch.
- Torque lug nuts by hand in a criss-cross pattern to your vehicle's factory spec. Impact wrenches are not recommended.
- Re-check lug nut torque at 25 miles and again at 100 miles.
- Check fender and caliper clearance with the car on the lift and on the ground, turning the wheels side to side, then drive slowly as a final check.
Caring for your wheels
- Clean regularly with mild soap and water only.
- Never clean wheels while they're hot.
- Remove brake dust, dirt and road grime promptly.
- Avoid harsh car-wash chemicals, abrasives and steel wool. They can permanently damage the finish, and that damage isn't covered.
How to make a claim
Pro Wheels requires warranty claims to go through the dealer you bought from, so contact us first at cervantesnoeh@gmail.com with your order number, photos of the issue and a short description. We'll help you through the process with Pro Wheels. Under Pro Wheels' terms, a wheel sent in for a warranty claim must be shipped freight prepaid with proof of purchase.
Shipping damage
Shipping damage is not a warranty issue. Inspect your wheels when they arrive, before mounting tires, and email us within 48 hours with photos so we can file a claim with the carrier. See our refund policy for details.